水热法制备Sr_2FeNiO_6催化剂及其催化性能研究

采用水热法制备双钙钛矿催化剂Sr_2FeNiO_6,考察不同浓度KOH溶液(4 mol·L~(-1)、6 mol·L~(-1)、8 mol·L~(-1)、10 mol·L~(-1)、12 mol·L~(-1)、14 mol·L~(-1))对催化剂性能的影响,利用X射线衍射、比表面积测定、程序升温还原和扫描电镜等对样品进行性能表征,并以催化甲烷燃烧为目标,考察催化剂催化性能。结果表明,矿化剂KOH浓度对样品性能影响较大,当浓度为10 mol·L~(-1)时,起燃温度最低,T_(10%)为430℃;浓度为8 mol·L~(-1)时,样品比表面积最大,为19.0 m~2·g~(-1),完全燃烧温度最低,T_(90%)为610℃。     

低温绝热气瓶绝热性能检测时间优化分析

蒸发率是用来检测低温绝热气瓶绝热性能是否合格的一个重要指标,但是目前仍存在检测时间较长的不足。依据一维传热模型,提出了一种基于一定检测时长的优化检测方法。该方法以少于24 h的实际检测数据作为样本来获取传热系数等部分参数,并利用获取的参数预测剩余时间的蒸发流量,最终实现缩短检测时间的目的。为了验证优化方法的有效性,搭建了恒温箱实验台并进行了相关试验测试。对比结果表明,计算结果与试验值符合良好,误差在5%以内,验证了模型的可靠性与实用性。     

Personalized broad learning system for facial expression

Multimedia Tools and Applications - Understanding human emotions through facial expressions is key enabling technology for interactive robots. Most approaches of facial expression recognition are...     

Fe基非晶合金增强1060铝基多层复合材料的组织与性能

采用累积叠轧焊+中间退火法复合轧制1060Al/Fe基非晶多层铝合金复合板材。利用光学显微镜、扫描电镜、X-衍射分析仪以及拉伸试验机分析Al基复合材料的微观组织结构变化、断口形貌、物相组成以及力学性能。结果表明:Fe基非晶复合材料的增强体在300 ℃中间退火过程中发生部分晶化,在累积变形轧制过程中发生破碎,并随着变形道次的增加,破碎程度随之增大;复合板前6道次的累积轧制变形出现了明显的加工软化现象,并且随着变形道次的增加,其加工软化的效果愈明显;随着累积轧制变形道次增加,Al基复合材料的力学性能发生了明显的变化,第2道次轧制变形后屈服强度与抗拉强度达到了最大值为140 MPa和156 MPa,伸长率为5.53%,达到最佳综合性能。     

Combined constant speed control method for a wind generator equipped with hydraulic energy storage

A wind generator equipped with hydraulic energy storage (WG‐HES) uses hydraulic transmission systems instead of gearbox transmissions, thus eliminating high‐power converters and reducing the tower‐top cabin weight. When there is no wind or the wind speed is extremely low, the pressured oil released by accumulators is used to drive a motor to operate at a constant speed, thereby generating constant‐frequency power. However, few studies have examined the constant speed control characteristics for generating electricity using only an accumulator group. In this study, a combined constant speed (CCS) proportional–integral–derivative (PID) control method based on “variable displacement and throttling” is proposed, which includes two closed loops and one regulating loop. First, a simulation model of the CCS PID control method for a variable motor was established in the Simcenter Amesim program. The influence of different PID parameters on the anti‐interference ability of the constant speed control of the motor was analyzed under a given load step. Then, we obtained the range of control parameter values and a set of optimal values. Second, the effectiveness of the CCS control method and the accuracy of the simulation results were verified on a 600‐kW WG‐HES system prototype. The results verified that the CCS control method has good anti‐interference ability and can meet the requirements of constant speed control for a variable motor under the best PID parameters. These results can provide a basis for developing control strategies for WG‐HESs when there is no wind or at low wind speeds.     

薄壁弱刚性钛合金结构件制造工艺

随着新型材料冶金技术的发展与进步,钛合金作为“崛起的第三代金属”已完全替代了铝镁合金和钢构件,成为航天飞行器上应用范围最广的材料之一。从某新研制航天飞行器外部结构件用钛合金材料的特性及切削特点入手,针对薄壁弱刚性钛合金结构件在实际加工过程中遇到的诸多难点,提出了相应的解决办法,并重新设计了零件工装。结果表明,改进措施不仅保证了零件质量,而且提高了零件加工效率,使单件零件的生产周期缩短了近10h。     

红阳二矿12号煤层标志性气体实验研究

针对红阳二矿12号煤层遗煤氧化的规律与特点，有效地进行防灭火工作，掌握采空区中遗煤氧化的速度，对红阳二矿12号煤层进行了煤样升温氧化实验，在温度不断升高的过程中检测出CO与多种烯烃气体，并且在不同温度下煤体析出气体的速度不同，最终选择CO、C₂H₄、C₂H₂作为标志性气体，产生的临界温度分别为59、176、403 ℃。在采空区检测出CO气体，说明采空区遗煤进入快速氧化阶段；检测出C₂H₄气体时，遗煤进入剧烈氧化状态；检测出C₂H₂气体时，说明采空区中已经产生明火，井下人员需要迅速撤离。通过煤体标志性气体的确定，建立12号煤层自燃预警系统，保证井下工作人员的生命安全与能源的充分利用。     

A universal HF-free synthetic method to highly efficient narrow-band red-emitting A2XF6:Mn4+ (A = K,Na, Rb,Cs; X = Si,Ge, Ti) phosphors

Mn⁴⁺-activated fluoride red-emitting narrow-band phosphors have been successfully used in wide color-gamut white LEDs for liquid crystal display (LCD) backlights. However, highly concentrated and toxic HF is usually used in their synthesis, causing environment and safety issues. In this work, we proposed a HF-free green method, that is, using NH₄F/HCl instead of HF, to synthesize a series of A₂XF₆:Mn⁴⁺ (A = K, Na, Rb, Cs; X = Si, Ge, Ti) phosphors. The microstructure, photoluminescence (PL) properties, thermal quenching, and applications of the synthesized phosphors were investigated. Using the proposed approach, the phosphors generally showed a pure phase, a particle size ranging from 5 to 45 μm, and some characteristic sharp emission lines of Mn⁴⁺ in the red spectral range. The internal quantum efficiency was varied in a broad range of 69%-94% under the 460 nm excitation, depending on the composition of the fluoride host. Among these compositions, K₂XF₆:Mn⁴⁺ (X = Ge and Ti) phosphors even had a similar external quantum efficiency (>60%) with commercial ones. By combining K₂GeF₆:Mn⁴⁺ (narrow-band red) and β-sialon:Eu²⁺ (narrow-band green) with a blue LED, a white light-emitting diode (wLED) backlight with a color gamut of 87.7% National Television System Committee Standard, color temperature of 8423 K, and a luminous efficacy of 110.8 lm/W was demonstrated. These results indicate that the synthetic method proposed in this work is universal for preparing highly efficient fluoride phosphors used in wLEDs.     

Polyurethane foaming with CO2 adducts from C8 alkyl grafted polyethyleneimines: Optimization of the grafting rate and application of the blowing agents

We previously explored a series of CO₂ adducts from alkylated polyethylenimines with C₄ to C₁₆ alkyl side chains, serving as climate-friendly blowing agents for polyurethanes (PUs). Among them, the polyethylenimine with C₈ alkyl (2-ethylhexyl) side chains demonstrated the highest foaming efficiency. In this study, we further changed the grafting rate of the C₈ alkyl, from 7 to 16%, and investigated the effects of the resulting blowing agents on the foaming process. For both foaming systems containing a castor oil-derived polyol (Polycin T-400) or a poly(propylene glycol) polyol (Polyether 4110), the CO₂ adducts with a grafting rate of 13% displayed the best foaming performance in terms of high dispersibility in the foaming systems, homogenous cellular morphology, and good mechanical properties. Moreover, the 13%-C₈-alkylated blowing agent demonstrated high suitability for the foaming systems from biomass-sourced polyols (like Polycin T-400). Therefore, the optimized CO₂-adduct blowing agent could replace the currently used climate-changing hydrochlorofluorocarbons and hydrofluorocarbons, as well as might contribute to the development of future renewable PU foams. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48752.     

热变形工艺对含硫非调质钢流变应力及组织的影响

在变形温度950~1150 ℃和应变速率0.01~5 s^-1下,通过Gleeble-3500热模拟试验机进行单道次压缩试验,研究了热变形工艺对含硫非调质钢F45MnVS流变应力及组织的影响。结果表明:随着应变速率的增大,热压缩过程中的峰值应力增加,随着温度的升高,峰值应力降低;动态再结晶平均晶粒尺寸随着应变速率、变形量的增加而减小,随着温度的提高而增大。